Common questions

What do the numbers in 6010 mean?

What do the numbers in 6010 mean?

The “60” in 6010 means 60,000 pounds’ tensile strength (the ability to resist being pulled apart) per square inch. The “1” means it can be run in any position—flat, horizontal, vertical, or overhead.

What do the numbers mean on electrodes?

The first two digits represent the resulting weld’s minimum tensile strength, measured in pounds per square inch (psi). The fourth digit represents the coating type and the type of welding current (AC, DC or both) that can be used with the electrode.

What does the third digit on E6010 and E7018 stand for?

The prefix “E” designates an arc welding electrode. The first two digits of a 4-digit number and the first three digits of 5-digit number indicate minimum tensile strength. For example, E6010 is a 60,000 psi tensile strength electrode while E10018 designates a 100,000 psi tensile strength electrode.

What is the difference between E6010 and E7018?

E 6010 electrode can be used on painted, galvanized, and unclean surfaces, while E 7018 is used on clean or new sheet metal. E6010 is used for deep penetration welding, while E 7018 is used for welding metal that tends to crack, producing quality welds with excellent toughness and high ductility.

What is 7010 welding rod used for?

Lincoln 7010. Cellulosic coated MMA/SMAW electrode for welding large-diameter pipe lines in the vertical-down position known as “stove -piping”.

What does the 1 stand for in E7018?

The “E” in E7018 electrode indicates a tool used for an arc-welding process. The 70 means it makes welds that are very strong (70,000 psi). The 18 means two things: The “1” means the electrode can be used in any position, and the “18” means low hydrogen and usually DC current.

What is the best 6010 welding rod?

Top 10 Best 6010 Welding Rod

  1. Radnor 6010. Check Price on Amazon.
  2. Super Optimal 6010 ER70S-6. Super Optimal 6010 ER70S-6 is one of the best welding rods for stainless steel.
  3. Matheson E6010.
  4. Hobart 6010.
  5. US Forge Welding Electrode E6010.
  6. Forney 31610 E6010.
  7. Blue Demon 6010.
  8. Lincoln Electric 6010 MIG Welding Rod.

Is E6010 a low hydrogen electrode?

The term “low hydrogen” has been around for about 60 years. It was first introduced to differentiate this classification of shielded metal arc welding (SMAW) electrode (e.g., E7018) from other non-low hydrogen SMAW electrodes (e.g., E6010).

What is 6011 rod used for?

The 6011 welding rod is useful for jobs that require deep penetration, no matter the position or welder setup. It is a solid all-around welding rod. Because it is an iron rod, it is useful for most kinds of iron and mild steel. You can handle just about anything with 6011 rods.

What is the polarity of the E6010 welding rod?

E6010 Welding Rod Polarity, Amperage and Settings When it comes to polarity, the 6010 electrodes have a DECP polarity. Compared to the 6011, the 6010 only works with Direct Current, and for this reason, it is not as flexible as the 6011. It is a known fact that the E6010 necessitates greater voltage as compared to other electrodes.

What is the toughness of an E6010 electrode?

E6010 require Stick welding electrode to have minimum V-Notch toughness values of 20 ft·lbf at –20°F [27 J at –30°C]. E6010 electrodes are can be used with DCEP (electrode positive) only & designed only for DCEP. Welding with AC or DCEN will results in unstable arc and poor welding finish for the weld beads.

What do the numbers mean on a 6010 welding rod?

Of course, the “E” stands for “electrode” while the first two numbers, like the “ 60 ” in 6010, means 60,000 pounds tensile strength per square inch. The tensile strength refers to the ability of the weld to resist being pulled apart. The third number “ 1 ” signifies it can be run in all four positions (horizontal, vertical, flat, and overhead).

What does the prefix e stand for in arc welding?

The prefix “E” designates an arc welding electrode. The first two digits of a 4-digit number and the first three digits of 5-digit number indicate minimum tensile strength. For example, E6010 is a 60,000 psi tensile strength electrode while E10018 designates a 100,000 psi tensile strength electrode. E.

Share this post